SHERWIN WILLIAMS - FINISH 1
FL9110P BED LINER
- Long lasting Polyurethane Finish
- Protects Surfacer from Impacts and Scratches
- Durable for Heavy Use
- Guards Against Chemicals, Solvents and Gasoline
- Easy Application with a Variety of Achievable Textures
- partially Filled for Easy Mixing in Can
ALSO GREAT ON :
- Ramps
- Trailers
- Wheel Wells
- Delivery Vehicles
- And Many More Items..............
APPLICATION:
Apply product with a body schutz type (we stock) spray gun.
Spray pressure at the gun should be set to 40-45 psi. The fluid hose should not exceed 24".
Step 1: Apply a double coat, wet-on-wet, 8" from the surface.
....flash 10-15 min.(if longer than 30 min. elapses,scuff sanding is required before applying another coat).....
Step 2: Apply another double coat,wet-on-wey, 8" from surface
....finale texture is dependent on distance of spray gun from the surface.Greater distance will give rougher texture.
Note: Minimum wet film buildup is 20 mils in order to achieve uniform appearance.
DRYING SCHEDULE:
Baking: 45 minutes at 140 deg. F (full cure in three(3) days). Any reassembly can occur after and cool down. Adjacent edges (tailgate to bed) can be separated with SHIELD masking paper after 60 minutes when the tailgate is closed. Separation with masking paper should be done untill product is fully cured.
Air Dry: Overnight at 70 deg. F (full cure in five(5) days). Adjacent edges (tailgate to bed) can be separated with SHIELD masking paper after 60 minutes when the tailgate is closed. Separation with masking paper should done untill product is fully cured. | 
Cart is empty
